Sticky Stampede
Sticky Stampede™

SPEC-L x W x H 40' x 12' x 10'
Weight Lbs.(Kg) 685 ( 311 )

Shipping Lbs.(Kg)
(2)-48"x40"x26" 445 (202)ea.

Inflatable Game Guidelines

The Sticky Stampede™
SPORTS OBSTACLE CHALLENGE
Detailed Game Instructions
Follow all
STANDARD INFLATABLE GAME GUIDELINES

SET-UP

  • The "Sticky Stampede"™ is a two piece modular game with an integrated air supply system. It is a unique obstacle course that has sticky “HOOK” surfaces throughout the game. The players’ movement is impeded and slowed down running through this course while wearing the special “Sticky Suit” Overalls.

  • Our Obstacle Modules are easily connected to each other by using the quick-clip connections at the ends of each game. The integrated floor connector flaps are then overlapped and attached to one another. The (2) “Sticky Stampede” game modules are also connected together in this fashion. They likewise, may be expanded and connected to other obstacle courses.

    • Air Exchange System

  • Airflow between successive Obstacle Modules is accomplished by connecting the Air Supply Tubes located at either end, under the center square flaps.

  • A small section of hard ribbed tubing is also provided that will be used as an insert between these common Air Supply Tubes. The tubing is placed inside and the straps are firmly tightened to prevent any air leakage.

  • Align the two inflatable game units end-to-end. The matching sides are then pulled together and fastened while the Air Supply Tubes recess inside the game. This will likewise provide proper airflow for the assembled game modules.

  • Next, connect the Blower Fan(s) to the outside inflation tubes where appropriate and inflate the game. We recommend a minimum of (1) high output Blower Fan per 40 feet of game length.

  • Observe the game as it inflates and watch all the connections as the game expands. Readjust any pieces where necessary to insure proper fit.

    • Cross-Over Floor Connectors

  • The “HOOK & LOOP” flaps located at the ends and “cross-over” floors of the game are used to secure the common connections between games even further.

  • Insert the “Male” connector flaps of one module between the matching “Female” floor connector flaps of the other unit. These connections generally serve as the crossover floor between the game units.

    • FOR SAFETY REASONS, CONNECTOR FLOOR FLAPS
    MUST BE PROPERLY SUCURED
    BEFORE PARTICIPANT GAMEPLAY IS ALLOWED.

    ADDITIONAL EQUIPMENT

    The “Sticky Stampede” Game includes the Inflatable Game Modules and the following additional equipment:

  • (2) Sticky “Cow Chip” Pucks.
  • (2) “Sticky Suit” Overalls ( one-size-fits-all ).
  • (2) Straw Cowboy Hats.

    • OPERATION

  • Ensure that participants are familiar with the game play rules and are correctly wearing their “Sticky Suit” Overalls and Straw Cowboy Hats.

    • ~ SHOES ARE NOT ALLOWED IN THE GAME ~

  • OBJECT OF THE GAME - ( RACE ) Competitors will race through the game course, the first player to exit is the winner. (May also be played as a Timed Event).

  • GAME VARIATION - ( SPORTS RACE ) Competitors will grab a “Cow Chip” from the “Bull’s Eyes” at the beginning of the course and then race through the game. The first player to successfully score a goal at the exit is the winner of that round.

  • GAME VARIATION - ( RELAY RACE ) Same as above except with teams. Players will be waiting at the end of the course to retrieve their “Cow Chip” Baton from Teammates. The first of the opponents scoring a “Bull’s Eye” at the front entrance to the game is the winning team.

    • *STRAW HATS - Must be worn at all times.
    A Player loosing their Hat must go back and retrieve it.

    ~ Extreme Sport Warning ~

    The Sticky Stampede™ is an exhilarating obstacle game that may be both challenging and physically demanding to some participants.

    INJURIES MAY OCCUR AS A RESULT OF NORMAL GAME PLAY.

    ALL Operators and Participants must be made aware of the potential hazards involved.

    TAKE DOWN

  • Flatten the entire game and remove all air before rolling.

  • The Inflatable Game should be tightly folded and rolled for more compact storage ( See STANDARD GAME GUIDELINES for additional detailed Take Down procedures ).

  • Outside LEFT and RIGHT UNITS may be folded in half for roll up, then placed in supplied Game Bag.

  • Interior CENTER UNIT, should be folded in thirds for roll up, then placed in supplied Game Wrap.

    • Copyright © 2001-2003 ~ QUALITY INFLATABLES